Crown FM250 Manual do Utilizador descarregar pdf (Página 10)

2–2

FM10000 User’s Manual

2.1 Operating Environment

You can install the FM10000 transmitter on any flat surface which should be clean and

well-ventillated as possible.

2.2 Tools Required

To install the FM10000, you will need the following tools:

❑Medium phillips screwdriver

❑Small flat-blade screwdriver

❑ /

❑

❑ESD (Electrostatic Discharge) protection grounding strap and/or mat.

2.3 Unpacking

3/16 inch hex driver

1/2 inch wrench and/or nut driver

1) Remove outer crate.



2) At the bottom of the cabinet are retainer brackets holding the 

cabinet to the shipping platform. Use 1/2 inch wrench to remove 

these brackets.



3) Carefully move the cabinet off the shipping platform to the 

position of final installation using appropriate methods to ensure the 

cabinet doesn't tip over.



4) Cabinet is now ready for installation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Sem comentários

Crown FM250 Manual do Utilizador Página 10